Tips for a Great Shave!

Tips for a Great Shave!

Proper shaving techniques, quality products and post-shaving skin care can help you look and feel your best. A good, close shave followed by the right facial wash and after shave moisturizer products go hand in hand to achieve optimum skin health. And, it can turn a chore into a pleasant morning ritual.

Top 10 Shaving Tips:

Warning – this is the long answer – but isn’t a couple of minutes of reading worth it? After all, your face is the first thing they notice……

1. Make Sure Your Beard is Thoroughly Wet

One of the keys to a great close shave without irritation or skin rash is to make sure your beard is thoroughly wet. Facial hair will absorb moisture up to 30% of its volume. Hair swollen with water becomes quite weak and therefore easier to cut.Showering before shaving is the ideal way to ensure you beard is properly moistened. If a shower is not possible, rinse your face and then apply a warm moistened towel to your face for at least a couple of minutes. This is the technique that barbers use. Never shave cold or apply shaving products to a dry face.

2. Use a Quality Shaving Cream

Use a shaving cream that has a high concentration of lubricants (eg silicones) and moisturizers. The best shaving creams create a rich creamy lather and do not foam up like the cheaper drug store brands. The less “foaming” in the shave cream the better, as it is what is in contact with the skin and beard that matters – all else is wasted. Less resistance, less irritation and less nicks also mean a longer lasting blade! While the primiary function of the shaving cream is to lubricate your face so that the razor will glide smoothly and effortlessly across the surface, it also serves to lock the moisture into the whiskers, keeping them soft and upright, primed for the cut. The ideal scenario is to leave the shaving cream on your face for at least a minute before you begin cutting, so that the beard is as soft and wet as possible.

3. A Shaving Brush is One of the Best Tools

One of the best tools you can use to achieve the optimum shave is a shaving brush (as top barbers do). A shaving brush does a couple of things. First, it helps raise the hair so that a closer cut is possible. Second, it helps create a rich creamy lather with the shaving cream that stays close to the skin. And, finally, it helps remove dead skin cells (exfoliation) which reduces the chance of blemishes, razor bumps and also helps the skin look and feel smooth and healthy. Always look for a shaving brush with bristles that have the right balance between softness (to create a rich creamy that stays close to the skin) and resistance to raise the beard (making a closer cut easier!)

4. Apply the shaving cream using the brush in a circular motion ending in an upward stroke to help lift the beard up and away from the face.

5. Use a Quality Razor and Change the Blades

Always use a good quality sharp razor blade. Be sure the blade is sharp. You’re not just cutting off hair, you’re also scraping off up to two layers of surface skin when you shave. A dull blade is more traumatic to the skin, making your face feel scratchy and look blotchy. Depending on the toughness of your beard, change the blade somewhere between every three and every ten shaves, if you shave every day. Two weeks is too long to go without changing blades. Regardless of the number of shaves, if the blade is dulled, ditch it.

As to which brand of razor to use – we think you can’t go wrong with any of the Gillette Mach series. Of course there are very high quality and expensive razors available at specialty retailers that you may want to try.

Rinse your blade under hot water before you begin to shave and after every few swipes. This removes the accumulated shaving cream, whiskers, and skin goop. For a really close shave, re-moisten the section you just shaved, by spreading a thin layer of lather from another area of your face, and then swiping that area again. Keep everything moist. (Note: The use of hot water here is to help lubricate, has nothing to do with “killing bacteria.”)

6. Use the Razor Properly

Ideally shave in the direction of the beard growth. Start with the sides, then the moustache area and last the chin. The chin hairs are the toughest, so this allows them the most time to soften under the shave cream.

Shaving against the direction of hair growth gives a closer shave, but has two drawbacks:

A. It’s a good way to donate blood, and
B. You run a high risk of cutting off a hair below skin level, causing an ingrown hair (razor bumps) – the whisker grows into the surrounding tissue instead of out of the pore, resulting in inflammation and possible infection.

To avoid these shaving problems, again, shave “with the grain” (that is, in the direction your hair grows.) Each person’s facial hair has its own growth pattern. If you are unsure of the direction of your beard, let it grow for a day or two and you’ll see it.

7. If you want an even Closer Shave

If you wish to achieve an even closer shave (as many barbers do) apply some more lather from your brush (add more cream if necessary) to the areas you wish to shave again. This is one of the extra advantages of using a brush. For most guys, re-shaving certain areas with the grain should do the job. Professional barbers, by the way, usually first shave with the grain, and then re-shave going sideways – but they’re trained professionals!

But, don’t over shave. Too much shaving will cause skin irritation and rashes.

Rinse the blade thoroughly before you put it away. (The water temperature isn’t going to have any impact on bacteria; you’re rinsing the blade to get rid of hairs, shaving cream, oils, and gunk, not to kill bacteria. You’d need to boil the razor for that, which is not necessary.) Do NOT wipe the blade with a tissue or towel–that will just dull it faster.

8. Cleanse and Soothe After Shaving

After shaving, when the skin is most vulnerable (remember, you’ve just scraped off up to 2 layers of surface skin!), rinse the face with warm water and use a facial wash that has a high concentration of tea tree oil (a natural antiseptic that is ideal to help cleanse and protect from spots and shaving rash) and witch hazel (for its soothing, healing and astringent properties).

9. Rinse with the coolest water that is comfortable and pat dry with a clean towel. (Don’t rub! Just pat)

10. Finish off with an Aftershave Moisturizer.

Shaving can remove up to two layers of skin. There is no other regular activity that does this, which is why it is so important to use a good quality moisturizer after shaving. An after shave moisturizer, designed as an after shave balm and moisturizer in one, is the ideal way to replace lost moisture and soothe the skin. And, be sure to use one made just for guys – these formulas are designed so that they are not greasy, absorb quickly and dry with a matte finish so that your face doesn’t look shiny. Typically moisturizers made for women are too greasy as men tend to have not only thicker skin but also oiler skin than women due to men’s larger sebaceous glands. The best aftershave moisturizers not only replace lost moisture and soothe, but also have ingredients that will cool and refresh the skin.

Following these 10 shaving tips should help you achieve optimum skin health, avoid shaving problems and help you look and feel your best.

The Author:

Buck Williams is a master barber with over 15 years of barbering and product development experience for premier barbershops, salons and manufacturers. Most recently, Buck has appeared on TV as a makeover guru, and behind the scenes on TV and film production sets and magazine features helping actors and sports celebrities look their best. Buck’s passion is helping men look and feel their best and believes that a great shave and post shave skin care is so important to the impression you make.

© 2004 – Avatar International LLC.

Leave a Reply

Your email address will not be published. Required fields are marked *