How to Use Starch on Men’s Dress Shirts
Here’s how to starch and iron men’s dress shirts.
Starching Men’s Shirt
Here’s the process of applying starch to men’s shirts and later iron them out for the extra professional look:
Since too much starch sprayed on the shirt can make it hard, (and unwearable!), you should be very careful while spraying it. Keep the spray can at least a foot away from the shirt.
By convention as well as convenience, the collar of the shirt is one of the first places that will become wrinkled if you keep turning the shirt around. Lay the shirt face down, with the back of the collar up. Spray a light spray of starch across the collar. Iron from one side to the other, applying steady pressure. Flip the shirt over. Flatten the collar out on the board. Spray a light spray of starch and iron the front of the collar.
Those who think a crease near the cuff button would be hardly noticeable can iron the cuff with the button on. Or, you can unbutton the cuff and spread it out across the board if like to do things just the way they should be done. Spray a layer of starch and iron the cuff flat. To iron the sleeves of a dress shirt, line up the seams of the shirt with the shirt facing up. Lay the seams parallel on the ironing board. Flatten the sleeve down, pulling toward each of the seams to make sure that the fabric does not bunch up beneath the layers. Spray a layer of starch over the arm and then iron the arm. Flip the shirt over and do the same on the back of the sleeve.
In the similar way, lay flat the shoulder on the small end of your table or ironing board, spray it carefully with starch again and iron out all the wrinkles.
Starching and ironing the back could be a little time consuming because it creases easily. You could accomplish this by laying one side of the front of the shirt up on the board and let the rest of the shirt hang off the board; now apply starch spray like always and iron the front of the shirt until the starch is dry.
The back of the shirt is one more place that gives away wrinkles very easily. Place the shirt face down on the board with the back flattened out completely. Spray the starch liberally and iron out wrinkles.
The Author:
Hair removal tips
Photo. Conger Design
Once upon a time ironing boards were all made of wood so there were very little options to choose from in terms of their frames and construction. Times have changed and now you can choose among ironing boards that are made of various grades of metal, steel, or other material.